SUPERNOVA WS400 EPA APPROVAL

ANEST IWATA WS400 spray gun complies with EPA NESHAP 40 CFR, Part 63 Subpart HHHHHH for the application of coatings within specific areas and approval is subject to the conditions of your regional air quality agency.

ANEST IWATA AK-1B, AK-1B2 airflow control valve (Item #8130, #8130B) or the ANEST IWATA AK-1R airflow regulator (Item #8131, #8131B) shall be supplied with each WS400 spray gun, and be properly attached to the spray gun and in good working condition. 

Air inlet pressure supplied to the WS400 spray gun shall be equal to or less than 29 psi.

Click here for EPA approval letter
For county information click here

SUPERNOVA WS400 SOUTH COAST APPROVAL

The ANEST IWATA Supernova Model WS400 is approved for the application of coatings subject to South Coast AQMD Rule 1151: Motor Vehicle and Mobile Equipment Non-Assembly Line Coating Operations.

Air inlet pressure supplied to the spray gun shall be less than or equal to 29 psig.

The approval is only valid if the WS400 spray gun is equipped with a properly operated ANEST IWATA AK-1B air flow control valve and pressure gage (Product Number 8130) or AK-1R air flow regulator and pressure gage (Product Number 8131).

Click here for South Coast AQMD approval letter
For county information click here